Save your current firmware with FlashMagic (Read & Save) before updating.Once connected, easily will be recognized by Techstream in Windows 32bits.(MVCI J2534 china clone use this driver ) Try connect to your computer with driver FDTI FT232 (be sure your system is 32bits or 64bits). Be sure your device is connected and recognized by the computer.To confirm that it was restored to 1.4.1 version open the Firmware Update tools and check the firmware version. STEP 9: When Flash Magic get out of the busy state, the process is finished, close the software and remove the device of USB port. The flashing should start, it takes a while (2 min aprox. STEP 7: In the Firmware panel update the. STEP 6: Baud-rate: I selected 38400, but maybe other (lower) can provide a secure flashing. STEP 5: Select the serial port: i.e serial port COM3, try to remove the mvci device and plug it again to see if the FlashMagin detects the COM port automatically (maybe is better to remove all others USB devices during the process (my case)) STEP 4: Open Flash Magic, select LPC2119 (LPC2000) in the field device STEP 3: Connect the mvci device to an USB port STEP 2: Download Flash Magic (used version 13.20) Here is the customer DIY solution for those who bricked their mini vci j2534 interface after using Firmware update tool.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |